AG-2580P_EN.fm Page 15 Tuesday, May 28, 2002 11:26 AM
EditingSpecifications
You can use your VCR as the playback or recording VCR. You can
use a camcorder as the playback VCR and your VCR as the GENERAL
recording VCR. Refer also to the other components? instruction Power requirement: AC 120 Vd, 60 Hz
manuals for connection and its operations.Power consumption
Power on: 18 W
AMake connections
Power off: 2.0 W
Example: When using this VCR as the playback VCRTemperature
Operating: 5°C to 40°C (41°F to 104°F)
Storage: -20°C to 60°C (-4°F to140°F)
This VCR (for playback)Operating position: Horizontal only
Dimensions (W x H x D) : 400 mm x 94 mm x 255 mm
To AUDIO/VIDEO OUT(15-3/4" x 3-3/4" x 10-1/16")
Weight: 3.1 kg (6.8 lbs)
Format: VHS NTSC standard
Maximum recording time
SP: 210 min. with ST-210 video cassette
EP: 630 min. with ST-210 video cassette
Audio/video cable
(not supplied)VIDEO/AUDIO
Signal system: NTSC-type color signal and EIA
monochrome signal, 525 lines/
60 fields
Recording/Playback : DA-4 (Double Azimuth) head helical
systemscan system
Signal-to-noise ratio: 45 dB
To audio/video inputHorizontal resolution: 230 lines
Frequency range
Another VCR (for recording)Normal audio: 70 Hz to 10,000 Hz
Hi-Fi audio: 20 Hz to 20,000 Hz
Input/Output: RCA connectors (IN x 2, OUT x 1)
I When using this VCR as the recording VCR, connect this VCR?s
audio/video input connectors to the audio/video output TUNER
connectors on the other VCR. If the playback VCR is monaural, Tuning system : Frequency-synthesized tuner
connect the audio output connector on the playback VCR to the Channel coverage
left audio input connector on this VCR.VHF: Channels 2-13
UHF: Channels 14-69
BLoad cassettes
CATV: 113 Channels
Insert the playback cassette into the playback VCR and the RF output: Channel 3 or 4 (switchable; preset to
cassette to be recorded on into the recording VCR.Channel 3 when shipped) 75 ohms,
unbalanced
CSelect input mode on recording VCR
Select the correct external input on the recording VCR.
TIMER
On this VCR (when using this VCR as the recording VCR);
Select ?L-1? ? when connecting the other VCR to the audio/video Clock reference: Quartz
Program capacity: 1-year programmable timer/
input connectors on the rear panel.
Select ?F-1? ? when connecting the other VCR to the audio/video 8programs
Memory backup for timer is not supported.
input connectors on the front panel.
Press AUX or CH+/- on the Remote [CH+/- on the VCR].
ACCESSORIES
DSelect edit modeProvided accessories: RF cable,
Set the edit mode to ?ON? for the VCRs if such a mode is Infrared remote control unit,
equipped.?AA? battery x 2
I On this VCR, set ?PICTURE CONTROL? to ?EDIT? ( pg. 13).
Specifications shown are for SP mode unless specified otherwise.
EStart playbackE. & O.E. Design and specifications subject to change without
Press PLAY (4) on the playback VCR.notice.
FStart recording
Press REC (7) on the recording VCR.
? 15 ?
Page 15May 28, 2002 11:25 am |